FP-10 Split Core Current Transformer CT Input: 5A 10A 20A 30A 40A 60A 75A 100A,Output Signal:0-50mA or 333 mV ,Accuracy Class 0.5 ,1.0 ,3.0

FP-10 Split Core Current Transformer  CT Input: 5A 10A 20A 30A 40A 60A 75A 100A,Output Signal:0-50mA or 333 mV ,Accuracy Class 0.5 ,1.0 ,3.0
FP-10 Split Core Current Transformer  CT Input: 5A 10A 20A 30A 40A 60A 75A 100A,Output Signal:0-50mA or 333 mV ,Accuracy Class 0.5 ,1.0 ,3.0 FP-10 Split Core Current Transformer  CT Input: 5A 10A 20A 30A 40A 60A 75A 100A,Output Signal:0-50mA or 333 mV ,Accuracy Class 0.5 ,1.0 ,3.0 FP-10 Split Core Current Transformer  CT Input: 5A 10A 20A 30A 40A 60A 75A 100A,Output Signal:0-50mA or 333 mV ,Accuracy Class 0.5 ,1.0 ,3.0 FP-10 Split Core Current Transformer  CT Input: 5A 10A 20A 30A 40A 60A 75A 100A,Output Signal:0-50mA or 333 mV ,Accuracy Class 0.5 ,1.0 ,3.0

 FP-10 Split Core Current Transformer  CT Input: 5A 10A 20A 30A 40A 60A 75A 100A,Output Signal:0-50mA or 333 mV ,Accuracy Class 0.5 ,1.0 ,3.0

Description

The FP series split core current transformer has been specially designed to facilitate their installation in new or already existing net works.They may be installed without opening any cable or bus-bar circuit. The connection of conventional CTs usually requires the interruption of the primary side current to pass cables or bus-bar through the transformer core to connect such cables to the primary terminals.

Features

Two built in fixing methods: panel/busbar

Very easy to install

Wide inner window,allowing clamping of big cables or bus-bars

Wide range of sizes to accommodate all the existing installation

 Input: 5A 10A 20A 30A 40A 60A 75A 100A

Output Signal:0-50mA or 333 mV 

Accuracy Class 0.5 ,1.0 ,3.0

Standard

IEC60044-1, IEC61869-1, IEC61869-2